- #Lorex client 13 defsult settings install#
- #Lorex client 13 defsult settings manual#
- #Lorex client 13 defsult settings full#
- #Lorex client 13 defsult settings software#
#Lorex client 13 defsult settings software#
Visit us online for up-to-date software and complete instruction manuals. Installation in a sheltered location is recommended.
#Lorex client 13 defsult settings install#
Install the camera where vandals cannot easily reach.Point the camera where there is the least amount of obstructions (e.g., tree branches).Night vision will also impact the accuracy of detection. NOTE: Accuracy of person and vehicle detection will be influenced by multiple factors, such as the object’s distance from the camera, the size of the object, and the height and angle of the camera. Level position (i.e., ceiling) Optimal angle range Install the camera between 8-16ft (2.5-5m) off of the ground.Angle the camera between 30~60° down from the level position.Optimal accuracy for objects within 50ft (~15m) and in the bottom ⅔ of the image. Lower accuracy for objects further away than 50ft (~15m) and/or in the top ⅓ of the image. Choose a location where objects of interest will be no further than 50ft (~15m) from the camera.Angle the camera so that objects of interest appear in the bottom ⅔ of the camera image.
#Lorex client 13 defsult settings full#
For full camera mounting instructions, see your camera’s documentation at. The following are important camera installation notes to ensure accurate person and vehicle detection.
![lorex client 13 defsult settings lorex client 13 defsult settings](https://mediabr.net/wp-content/uploads/2019/08/First-Screen-before-adding-.png)
_ Ensuring Accurate Person and Vehicle Detection Record your password below and store in a secure place: For future reference, it is recommended that you record your password here: The Wizard will help you configure core system settings. When you first power up your recorder, the Lorex Setup Wizard will begin. Turn the recorder on using the power switch on the back panel. Use the included power adapter to connect the recorder to a nearby outlet. See Changing the Recorder’s Output Resolution on the rear for details. If you need to switch monitors, make sure you set the recorder to an output resolution supported by the new monitor before switching. IMPORTANT: The system will automatically match the resolution of the connected monitor the first time you use the recorder. The HDMI port supports up to 4K resolution, and VGA supports up to 1080p. STEP 4: Connect monitor*Ĭonnect the recorder to a monitor using the included HDMI cable or a VGA cable (not included). All other system features can be used without an Internet connection. NOTE: To receive automatic firmware updates and enable remote viewing with mobile apps, a high speed Internet connection is required (minimum upload speed of 3.5 Mbps required for remote viewing). STEP 3: Connect router*Ĭonnect the recorder to your router using the included Ethernet cable. STEP 2: Connect mouseĬonnect the included mouse to a USB port on the recorder. Before selecting a permanent mounting location for your cameras, see Ensuring Accurate Person and Vehicle Detection below for important camera installation notes.For full instructions on installing your cameras, please refer to your camera’s documentation at. This guide covers connecting cameras to your security recorder only.You cannot connect multiple extension cables to each other. The extension cable must be a single stretch of cable between the recorder and camera.Test your cameras prior to selecting a permanent mounting location by temporarily connecting the cameras and cables to your DVR. Your recorder’s back panel may appear different, with all the same ports in different locations.
#Lorex client 13 defsult settings manual#
NOTE: For full instructions on using the extra ports, please refer to your security recorder’s instruction manual at īack panels shown below are for illustration only. Overview of extra ports: Audio In/Out, Connect microphone / speaker, RS485, Connect Pan-Tilt-Zoom (PTZ) cameras
![lorex client 13 defsult settings lorex client 13 defsult settings](https://i.stack.imgur.com/XUqvW.png)
![lorex client 13 defsult settings lorex client 13 defsult settings](https://www.lorextechnology.com/downloads/apps_updates/Lorex-Client-13/manual-EN/graphics/11c3fb72508c430bd508272545556ad99fdfe59b.png)
![lorex client 13 defsult settings lorex client 13 defsult settings](https://www.ipcent.com/Content/images/lorex/lorex_onvifer.png)
See the steps below (expanded instructions to the right) to complete initial setup of the recorder:įor camera compatibility information, visit /compatibility.